|
|
|
|
|
|
The CNC Benchtop Mill and Desktop Mill are complete milling machines and include the MN400E advanced motion controller and the MillMaster Pro 2009 G-code control software. Precision ground bedways, bipolar drive electronics for 40% more power, and high torque 175 oz-in motors on all axes provide unmatched quality and performance.
Both Units are available with either a Standard or Extended Y-axis.
SPECIFICATIONS:
| X-axis Travel | 9.00" |
| Y-axis Travel | 3.00" or 5.00" |
| Z-axis Travel | 6.50" |
| Resolution | .0001" |
| Backlash | .003" Max. |
| Hole thru Spindle | 0.405" |
| Spindle Nose Thread | 3/4"-16 TPI |
| Spindle Taper | #1 Morse |
| Spindle Speed Range | 75-2800 RPM |
| Spindle Motor | 1/2 HP DC |
| Table Size | 2.75× 13" |
| Included Accessories:
Remember to Inquire about our hands-on CNC Training. Click here for more information. |
|
||||||||||||||||||||||||||||||
Mill Accessories
Precision Rotary Table Model 3700ST
 |
This high precision, stepper motor driven rotary table can be used with a mill and MillMaster Pro software allowing a machinist to produce complex parts with precision. The rotary "A" axis is supported by MillMaster Pro and is commanded in degrees. Fastens to mill bed using standard hold down set (included). Can be used with optional tailstock part # 3702 for working on longer parts between centers or with optional vertical mount, part # 3701. The standard resolution using half stepping results in 80 discrete positions per degree (or 0.0125 deg per step). |
|
|
|
|
|
|
|
|
|
|
**Click here
for Benchtop CNC tools and accessories.
prices updated 01/06/2010