Rong Fu/Enco/Grizzly Stand Type CNC Mill Kit
|
(The instruction manuals, and fastening hardware are included but not shown in photo for clarity.) |
Offering impressive machining power, repeatability, and convenience, the CNC Express Conversion Kit is available as a complete retrofit kit ready to install on your own manual Rong Fu RF31,RF45, Enco, Grizzly or similar mill/drill. If you enjoy building projects, you can save money and have fun building your own CNC Express CNC milling machine. With this kit installed, you'll be able to machine complex shapes that would otherwise be impossible and you'll be able to repeat the process achieving perfect duplicate parts with very little effort and mostly unattended operation.
The custom made precision ballscrews on both the X and Y axes allow the typical conventional and the more desirable climb milling operations with accurate precision circular and contour cuts without the tedious setup of a rotary table.
The kit includes step-by-step, illustrated assembly instructions to make the whole process easy and fun.
The kit includes pre-wired stepper
motors, motor mounting plates with covers, ballscrews, pulleys, belts,
limit switches, and all mounting bolts. In addition to the above components,
this package also includes MillMaster
Pro for Windows G-code interpreter and graphical simulation software,
the DriveRack electronics
with built-in MN400 USB controller. All cabling and manuals are included...
all you supply is the base mill, a low cost computer, and your labor. Just bolt everything on, make a few adjustments
and you're up and running in less time than with any other system. Also for your
convenience, we offer a suitable base machine at a discounted price when purchased with this kit.
All accessories shown for the factory built CNC Express are also available for the Conversion Kit.
KIT INCLUDES:
|
|
CNC Lathe 1236 Conversion Kit
|
The CNC Lathe 1236 Conversion Kit is available as a complete retrofit kit ready to install on your own manual Enco, Birmingham, Jet, Nova, Grizzly, or similar 12" X 36" lathe. The kit offers ample machining power, repeatability, and convenience, With this kit installed, you'll be able to use single point cutting tools to eliminate the need for form tooling and the need for the oprator to actively perform all the operations by hand. You'll be able to call up a part program and machine perfect duplicate parts. The custom made precision ballscrews on both the X and Z axes allow precision taper and curved cuts without the setup of a compound slide. And with the electronic threading option you’ll be able to make infinitely variable internal, external, single or multistart as well as tapered (pipe) threads.
All
mechanical components are precision engineered and the kit include step-by-step, illustrated instructions.
The kit includes pre-wired stepper
motors, motor mounting plates with covers, ballscrews, pulleys, belts,
limit switches, and all mounting bolts. In addition to the above components,
this package also includes TurnMaster
Pro for Windows G-code interpreter and graphical simulation software, and the
DriveRack electronics
with built-in MN400 USB controller.
All cabling and manuals are included... all you supply is the basic 12" x 36" lathe and a suitable desktop or laptop computer. We also offer a suitable base lathe (if you don't
already have one) at a discounted price when purchased with this kit.
All accessories shown for the CNC Lathe 1236 are also available for the Conversion
Kit.
KIT INCLUDES:
|
|
|
|
|
|
|
|
|
|
|
|
CNC Lathe 1340 Conversion Kit
The CNC Lathe 1340 Conversion Kit is available as a complete retrofit kit ready to install on your own manual Enco, Birmingham, Jet, Nova, Grizzly, or similar 13" X 40" lathe. The kit offers ample machining power, repeatability, and convenience, With this kit installed, you'll be able to use single point cutting tools to eliminate the need for form tooling and the need for the oprator to actively perform all the operations by hand. You'll be able to call up a part program and machine perfect duplicate parts. The custom made precision ballscrews on both the X and Z axes allow precision taper and curved cuts without the setup of a compound slide. And with the electronic threading option you’ll be able to make infinitely variable internal, external, single or multistart as well as tapered (pipe) threads.
All
mechanical components are precision engineered and include step-by-step, illustrated instructions.
The kit includes pre-wired stepper
motors, motor mounting plates with covers, ballscrews, pulleys, belts,
limit switches, and all mounting bolts. In addition to the above components,
this package also includes TurnMaster
Pro for Windows G-code interpreter and graphical simulation software, and the DriveRack electronics
with built-in MN400 USB controller. All cabling and manuals are included... all you supply is the basic 13" x 40" lathe and a suitable desktop or laptop computer. We also offer a suitable base lathe (if you don't
already have one) at a discounted price when purchased with this kit.
All accessories shown for the CNC Lathe 1236 are also available for the Conversion
Kit.
KIT INCLUDES:
|
|
|
|
|
|
|
|
|
|
|
|
Variable Spindle Speed Kit for Mill or Lathe
The Variable Spindle Speed kit includes the cabinet that mounts to the mill (999-6500-040) or the parts kit for the lathe (999-1236-055), a 2 HP VFD, emergency stop, variable speed control and electronic display as well as the necessary mounting hardware.
|
|
|
|
|
|
|
|
|
|
|
Threading Kit
The Threading kit includes the threading encoder, cable, pulleys, and mounting hardware.
|
|
|
|
|
|
|
|
|
|
|