Mid-size Conversion Kits

1236 Lathe CNC Express

Rong Fu/Enco/Grizzly Stand Type CNC Mill Kit

CNC Mill Kit Photo

Offering impressive machining power, repeatability, and convenience, the CNC Express Conversion Kit is available as a complete retrofit kit ready to install on your own manual Rong Fu RF31,RF45, Enco, Grizzly or similar mill/drill. If you enjoy building projects, you can save money and have fun building your own CNC Express CNC milling machine. With this kit installed, you'll be able to machine complex shapes that would otherwise be impossible and you'll be able to repeat the process achieving perfect duplicate parts with very little effort and mostly unattended operation.

The custom made precision ballscrews on both the X and Y axes allow the typical conventional and the more desirable climb milling operations with accurate precision circular and contour cuts without the tedious setup of a rotary table.

The kit includes step-by-step, illustrated assembly instructions to make the whole process easy and fun.

The kit includes pre-wired stepper motors, motor mounting plates with covers, ballscrews, pulleys, belts, limit switches, and all mounting bolts. In addition to the above components, this package also includes MillMaster Pro for Windows G-code interpreter and graphical simulation software, the DriveRack electronics with built-in MN400 USB controller. All cabling and manuals are included... all you supply is the base mill, a low cost computer, and your labor. Just bolt everything on, make a few adjustments and you're up and running in less time than with any other system. Also for your convenience, we offer a suitable base machine at a discounted price when purchased with this kit.

All accessories shown for the factory built CNC Express are also available for the Conversion Kit.

KIT INCLUDES:

  • 5TPI (.200") ballscrews at .003" per foot max linear error
  • Stepper motors (2) 34HT750 (1) 23HT350
  • DriveRack high performance power driver
  • Built-in Motionet MN400 Continuous contouring motion controller
  • MillMaster Pro for Windows G-code control & graphical software
  • Limit switches, cables, technical manuals, and a CNC Express serial # plate

Product

Order #

Price

Order

CNC EXPRESS MILL Conv Kit RF31

999-1000-200

$4,395

CNC SQ Express Mill Conv Kit RF45

999-1000-195

$4,395

CNC SQ Express Mill Conv Kit ZX45

999-1000-190

$4,395

CNC XL Express Mill Conv Kit ZX45L

999-1000-185

$4,395

Mill Mechanical Conversion Kit

The mill mechanical conversion kits contain the parts and ballscrews to do the conversion, without the motors, DriveRack, motion controller and Software.

Product

Order #

Price

Order

EXPR Mill-31 CNC Conv. Kit, Mechanical

900-0090-025

$1,995

EXPR Mill SQ/RF45 CNC Conv. Kit, Mechanical

900-0090-145

$2,195

EXPR Mill SQ/ZX45 CNC Conv Kit, Mechanical

900-0090-125

$2,195

EXPR Mill XL/ZX45L CNC Conv. Kit, Mechanical

900-0090-225

$2,295


CNC Lathe 1236 Conversion Kit

1236 Conversion Kit

The CNC Lathe 1236 Conversion Kit is available as a complete retrofit kit ready to install on your own manual Enco, Birmingham, Jet, Nova, Grizzly, or similar 12" X 36" lathe. The kit offers ample machining power, repeatability, and convenience, With this kit installed, you'll be able to use single point cutting tools to eliminate the need for form tooling and the need for the oprator to actively perform all the operations by hand. You'll be able to call up a part program and machine perfect duplicate parts. The custom made precision ballscrews on both the X and Z axes allow precision taper and curved cuts without the setup of a compound slide. And with the electronic threading option you’ll be able to make infinitely variable internal, external, single or multistart as well as tapered (pipe) threads.

All mechanical components are precision engineered and the kit include step-by-step, illustrated instructions.

The kit includes pre-wired stepper motors, motor mounting plates with covers, ballscrews, pulleys, belts, limit switches, and all mounting bolts. In addition to the above components, this package also includes TurnMaster Pro for Windows G-code interpreter and graphical simulation software, and the DriveRack electronics with built-in MN400 USB controller. All cabling and manuals are included... all you supply is the basic 12" x 36" lathe and a suitable desktop or laptop computer. We also offer a suitable base lathe (if you don't already have one) at a discounted price when purchased with this kit.

All accessories shown for the CNC Lathe 1236 are also available for the Conversion Kit.

KIT INCLUDES:

  • 5TPI (.200") ballscrews at .003" per foot max linear error
  • Stepper motors (1) 34HT750 (1) 42HT1700
  • DriveRack high performance power driver
  • Built-in Motionet MN400 Continuous contouring motion controller
  • TurnMaster Pro for Windows G-code control & graphical software
  • Limit switches, cables, technical manuals, and a CNC 1236 serial # plate

Product

Order #

Price

Order

CNC Lathe 1236 Thrd Conv Kit

999-1000-301

$4,295

CNC Lathe 1236 Conv Kit

999-1000-300

$3,995

CNC Lathe 1236 Mechanical Conversion Kit

The mechanical conversion kit includes the parts and ballscrews to do the mechanical conversion of a manual lathe, without the motors, DriveRack, motion controller and Software.

Product

Order #

Price

Order

1236 Lathe CNC Conv. Kit, Mechanical

900-0090-026

$1,995


CNC Lathe 1340 Conversion Kit

1340 Conversion Kit

The CNC Lathe 1340 Conversion Kit is available as a complete retrofit kit ready to install on your own manual Enco, Birmingham, Jet, Nova, Grizzly, or similar 13" X 40" lathe. The kit offers ample machining power, repeatability, and convenience, With this kit installed, you'll be able to use single point cutting tools to eliminate the need for form tooling and the need for the oprator to actively perform all the operations by hand. You'll be able to call up a part program and machine perfect duplicate parts. The custom made precision ballscrews on both the X and Z axes allow precision taper and curved cuts without the setup of a compound slide. And with the electronic threading option you’ll be able to make infinitely variable internal, external, single or multistart as well as tapered (pipe) threads.

All mechanical components are precision engineered and include step-by-step, illustrated instructions.

The kit includes pre-wired stepper motors, motor mounting plates with covers, ballscrews, pulleys, belts, limit switches, and all mounting bolts. In addition to the above components, this package also includes TurnMaster Pro for Windows G-code interpreter and graphical simulation software, and the DriveRack electronics with built-in MN400 USB controller. All cabling and manuals are included... all you supply is the basic 13" x 40" lathe and a suitable desktop or laptop computer. We also offer a suitable base lathe (if you don't already have one) at a discounted price when purchased with this kit.

All accessories shown for the CNC Lathe 1340 are also available for the Conversion Kit.

KIT INCLUDES:

  • 5TPI (.200") ballscrews at .003" per foot max linear error
  • Stepper motors (1) 34HT750 (1) 42HT1700
  • DriveRack high performance power driver
  • Built-in Motionet MN400 Continuous contouring motion controller
  • TurnMaster Pro for Windows G-code control & graphical software
  • Limit switches, cables, technical manuals, and a CNC 1340 serial # plate

Product

Order #

Price

Order

CNC Lathe 1340 Thrd Conv Kit

999-1000-401

$4,695

CNC Lathe 1340 Conv Kit

999-1000-400

$4,395

CNC Lathe 1340 Mechanical Conversion Kit

The mechanical conversion kit includes the parts and ballscrews to do the mechanical conversion of a manual lathe, without the motors, DriveRack, motion controller and Software.

Product

Order #

Price

Order

1340 Lathe CNC Conv. Kit, Mechanical

900-0090-028

$2,195

Lathe Motor Assemblies (optional)

Picture

Product

Order #

Price

Order
13HT750 motor with armored cable

34HT750, armored w/circ. conn.

305-3475-280

$246

13HT750 motor with armored cable

34HT1275 single shaft, armored w/circ. conn.

305-3412-280

$277

13HT750 motor with armored cable

34HT750 single shaft w/Leads

305-3475-080

$181

13HT750 motor with armored cable

34HT1275 single shaft w/Leads

305-3412-080

$212


Variable Spindle Speed Kit for Mill or Lathe


The Variable Spindle Speed kit includes the cabinet that mounts to the mill (999-6500-040) or the parts kit for the lathe (999-1236-055), a 2 HP VFD, emergency stop, variable speed control and electronic display as well as the necessary mounting hardware.

Product

Order #

Price

Order

Variable Speed Controller, Mill EXPR/SQ/XL

999-6500-040

$650

2HP VFD, Lathe 1236/1340 Conv.

999-1236-055

$595


Threading Kit


The threading kit includes the threading encoder, cable, pulleys, and mounting hardware.

Product

Order #

Price

Order

Thread Kit For 1236 Lathe

980-0000-355

$349

Thread Kit For 1340 Lathe

980-0000-360

$349