Industrial CNC Rotary Tables

6", 8", and 10" Models

Rotary Table Photo

This series of high precision, stepper motor driven, vertical/horizontal rotary tables can be used with a milling machine to produce complex parts with great accuracy. The rotary "A" axis is supported by our MillMaster Pro and is commanded in degrees. The standard resolution using half stepping results in 100 discrete postions per degree (or 0.005 degrees/step). The stepper motor is the 34HT390 rated at 6.6 amps per phase and includes prewired, armor jacketed cables with a circular locking Amp connector.


FEATURES:

  • 90:1 Gear Ratio; 0.005°/Step
  • Horizontal and vertical mounting
  • Morse taper center hole
  • T-Slots and extra deep coolant channels
  • Industrial quality armor jacketed 10 foot long cable
  • IP65 splash protected entry
  • Matching tailstock available

SPECIFICATIONS:

Standard Speed Range
0.1 - 4.6 RPM
Resolution
0.005°
Flatness of Clamping Surface (concave)
0.0006"
Concentricity of Center Bore
0.0008"
Parallelism of Clamping Surface to Angle Face
0.0008"
Squareness of Angle Surface to Clamping Surface
0.0004"
Squareness of Clamping Surface to Center Slot
0.0008"
Center Through Hole Diameter
1.181"
Morse Taper of Through Hole
#3

Rotary Table Drawing

Part#

900-0095-006 900-0095-008 900-0095-013
  6” Table 8” Table 10” Table
A 9.53 11.20 12.90
B 7.72 9.40 11.30
C 0.472 0.552 0.650
D 6.296 7.782 9.800
E 2MT 3MT 3MT
F 7.320 8.204 9.960
G 0.472 0.570 .562
H 3.350 3.944 4.330
I 4.920 5.985 6.750
J 0.47 0.61 0.63
K 3.0 3.7 4.1
L 9.351 12.181 13.003
M 3.230 3.880 4.175
N 1.46 1.90 1.90
T-Slots 0.390 0.465 0.465


MOTOR ELECTRICAL POWER CONNECTOR:

4 Pin Connector Diagram

4 pin female circular connector-front view cable length - 10' standard



Product

Order #

Price

Order

6 inch CNC Rotary Table

900-0095-006

$945

3 Jaw Chuck Kit for 6 inch Rotary Table

900-0095-004

$370

4 Jaw Chuck Kit for 8 inch Rotary Table

900-0095-022

$534

Tailstock for 6 inch Rotary Table

900-0095-007

$185

       

8 inch CNC Rotary Table

900-0095-008

$995

3 Jaw Chuck Kit for 8 inch Rotary Table

900-0095-010

$472

4 Jaw Chuck Kit for 6 inch Rotary Table

900-0095-021

$453

Tailstock for 8 and 10 inch Rotary Tables

900-0095-009

$185

       

10 inch CNC Rotary Table

900-0095-013

$1,100

3 Jaw Chuck Kit for 10 inch Rotary Table

900-0095-014

$583

4 Jaw Chuck Kit for 10-in Rotary Table

Coming

Soon



Mini CNC Rotary Table and Accessories

4" Model

Precision Rotary Table Photo

900-0095-001 ___ 4 inch CNC Rotary Table w/Circ conn & 10' cable

900-0095-005 ___ 4 inch CNC Rotary Table w/ din conn. 1ft cable


This high precision, stepper motor driven rotary table can be used with a mill and MillMaster Pro software allowing a machinist to produce complex parts with precision. The rotary "A" axis is supported by MillMaster Pro and is commanded in degrees. The standard resolution using half stepping results in 80 positions per degree (or 0.0125 deg per step).

The rotary table can fasten directly to themill bed using standard hold down set (included) or it can be used with the optional vertical mount, part # 870-3701-000 and/or tailstock part # 870-3702-000 for working on longer parts between centers. Additionally a self-centering 3-Jaw chuck Part# 870-1041-000 as well as a independent type 4-jaw chuck part# 870-1042-000 are available. There are additional accessories also available as shown below.

4in CNC Rotary Table

MOTOR ELECTRICAL POWER CONNECTOR:

Order #

Description

Motor Model

Torque

"A" Dimension

Connector

900-0095-001 4 inch CNC Rotary Table w/Circ conn & 10' cable 23HT350D 350 oz.in 5.68"

4 Pin Connector Diagram

900-0095-005 4 inch CNC Rotary Table w/ din conn. 1ft cable 23HT175D 175 oz.in 4.45"

4 Pin Connector Diagram



Four-jaw chucks have four advantages over three-jaw chucks. 1) They can be used to hold irregularly shaped parts. 2) With the use of a dial indicator, they can be used to center parts with great accuracy. 3) Four-jaw chucks can be used to deliberately hold a part off-center. 4) They can clamp stock tighter. This is a valuable asset when machining cams, crankshafts, and similar parts. The main disadvantage of the 4-jaw independent chuck is that the jaws must be individually set, adding extra time to setups. Like the 3-jaw chucks, 4-jaw chucks can be used to clamp either externally or internally. This 2.5" (63mm) 4-jaw chuck is designed to grip from 3/32" (2mm) up to 1-3/16" (30mm) diameter stock with the jaws in the normal position. For larger diameters, the jaws are reversed to grip up to 2-1/4" (56mm). The chuck has a .687" (17mm) through hole with a 3/4-16 thread. A hex key is used to tighten each jaw individually. Tommy bars (provided) are used in the holes in the side to tighten and loosen the chuck for more leverage. A groove is around the base of the chuck so that angle clamps can be used to mount it to the table of a mill as a holding fixture.

870-1044-000 4 Jaw Chuck

This compact chuck is a good all-around workhorse for most lathe work. It has a clamping range of from 3/32" (2 mm) up to 1-3/16" (30 mm) diameter with the jaws in the normal position. With the jaws in the reversed position, work up to 2-1/4" (56 mm) can be gripped. The hole through the chuck is .687" (17 mm). Rotating the knurled ring closes all three jaws simultaneously to quickly grip round or hexagonal stock. Tommy bars (provided) are used in the holes in the side to tighten and loosen the chuck for more leverage. The chuck has a 3/4-16 thread to fit the spindle on the lathe or mill.

870-1041-000 3 Jaw Chuck

Rotary Table Right Angle Attachment

Designed to easily mount the Rotary Table on a vertical plane and maintain rigidity.

870-3701-000 Rotary Table Right Angle Attachment

Optional Tail Stock for Mill

Mounts on mill table and is adjustable to allow for perfect alignment between the rotary table and the tailstock while holding long parts between centers.

870-3702-000 Optional Tail Stock for Mill

Live Center

The center is ball bearing mounted so that it can rotate with the part, reducing wear and heat.

870-1191-000 Live Center

Spur Driver

Used in the Headstock to drive wood when turning between centers. It is a simple and direct method which takes less time to set up than using a 3 Jaw Chuck.

870-3035-000 Spur Driver

Allows chucks with a 3/4-16 spindle thread to be mounted to the tailstock for holding tools or work

870-1230-000 Morse #0 to 3/4-16 Chuck Adapter

Allows you to attach the 3-Jaw chuck to the rotary table so that you can hold round pieces.

870-3709-000 Rotary Table Chuck Adapter


Product

Order #

Price

Order

4 inch CNC Rotary Table w/Circ conn & 10' cable

900-0095-001

$465

4 inch CNC Rotary Table w/ din conn. 1ft cable

900-0095-005

$395

3 Jaw Chuck

870-1041-000

$105

4 Jaw Chuck

870-1044-000

$115.50

Rotary Table Right Angle Attachment

870-3701-000

$78.75

Optional Tail Stock for Mill

870-3702-000

$78.75

Live Center

870-1191-000

$42

Spur Driver

870-3035-000

$26.25

Morse #0 to 3/4-16 Chuck Adapter

870-1230-000

$42

Rotary Table Chuck Adapter

870-3709-000

$5.75