Floor Model Knee Mill Conversion Kit

CNC Knee Mill Cnversion

Bridgeport XY Kit

The Bridgeport XY CNC retrofit kit includes the mechanical components needed to convert the X and Y axes of your manual Bridgeport, Jet, Enco or most any similar J-head type mill for CNC operation. All components are precision engineered. The kit includes (2) Size 42 motor mounting plates, (2) motor pulleys, (2) lead screw pulleys, (2) motor covers, (2) drive belts, and all required bolts, dowels, and spacers. For use with NEMA 42 size motors (Order separately).
Product Order # Price Order
Bridgeport XY Kit 999-1000-100 $795

NEW Improved Design for 2017!

CNC Bridgeport Knee Conversion Kit

The Bridgeport Knee CNC retrofit kit includes the mechanical components needed to automate the knee of a manual Bridgeport, Jet, Enco or most any similar type milling machine for motorized control. All components are precision engineered. Kit includes a size NEMA 42 motor mounting plate, motor pulleys, lead screw pulley, motor cover, drive belt, and all required bolts. For use with NEMA 42 size motors.(order separately). For best results with the new larger pulley (3:1), we recommend the 42HT4000.
Product Order # Price Order
CNC Bridgeport Knee Conversion Kit 999-1000-102 $395

NEW Improved Design!

Bridgeport Quill Kit

The Bridgeport CNC Quill retrofit kit includes the mechanical components needed to convert the Z axis of your manual Bridgeport or Enco mill for CNC operation. All components are precision engineered and include the hard anodized quill feed drive frame w/ size 34 motor mount, the ball screw and ball nut assembly, the motor and ball screw pulleys, the motor cover, and all needed bolts, dowels, and spacers. Ideally suited for use with the 34HT1275 motor (Order separately).
Product Order # Price Order
Bridgeport Quill Kit 999-1000-101 $1,495

High Performance Ballscrew Kit

Ballscrew Kit Photo Upgrade your Bridgeport series 1 style knee mill with this precision-rolled ballscrew kit. The screw and nut assemblies are made of hardened steel for durability and long life. This ballscrew kit will provide a load life expectancy of 50 million inches of travel at an operating load of 400 pounds. The many advantages in this design over other products on the market include:

• Accuracy of +/-.003" per foot

• Preloaded Ball Nuts- Each ball nut is preloaded to eliminate lost motion. This system stiffness provides faster response from a control command. This added stiffness also allows heavier cuts and climb milling thus increasing productivity. The preload is adjustable. This feature permits readjustment for wear and reduces the need for repair or future replacement.

• Brush-Type Wipers: Brush-type wipers, at the ends of each preloaded ball nut assembly, prevent entry of dirt and metal chips

• Easy-Access Lubrication: Lubrication of ball nuts made easy through 5/32" holes in the flanges. These holes provide for attachment of existing lube tubing. Available lengths for the X axis are: 36", 42", and 48" (these refer to the table lengths). The Y axis selections are: 9", 12", and 16". Note that the Y axis length to select is the travel distance and not the table width.

Product Order # Price Order
Bridgeport Ballscrew Kit 9 x 36 999-1000-202 $1,255

Bridgeport Ballscrew Kit 9 x 42 999-1000-203 $1,288
Bridgeport Ballscrew Kit 9 x 48 999-1000-204 $1,303
Bridgeport Ballscrew Kit 12 x 36 999-1000-205 $1,260
Bridgeport Ballscrew Kit 12 x 42 999-1000-206 $1,293
Bridgeport Ballscrew Kit 12 x 48 999-1000-207 $1,308
Bridgeport Ballscrew Kit 16 x 36 999-1000-208 $1,270
Bridgeport Ballscrew Kit 16 x 42 999-1000-209 $1,303
Bridgeport Ballscrew Kit 16 x 48 999-1000-210 $1,318

The Variable Spindle Speed kit includes the cabinet that mounts to the mill, a 2 or 3 HP VFD, emergency stop, variable speed control and electronic display as well as the necessary mounting hardware.
Product Order # Price Order
2HP Variable Speed Spindle Controller, LeGrande 999-6500-037 $650
3 HP Variable Speed Spindle Controller, LeGrande 999-6500-039 $850

CNC Rack-Mount Control Systems for Full-Size Machines

Rack Mount System
A complete pre-engineered package to automate your full-size Bridgeport, Enco, or similar size knee mill. Just couple the motor shafts to your machine's drive screws, plug in the cables, turn on the power, and install the software. You can immediately jog the motors by pressing Ctrl-J, and clicking on the X+, X-, Y+, Y-, Z+, and Z- buttons! It's literally that easy! You can write simple part programs as well as use the built in wizards screens to generate programs for pockets and bolt hole circles. The drill holes can be simple down/up or with chip break cycles, chip clearing cycles etc... You can also use your favorite CAM program to generate complex 3D simultaneous surfacing machining tool paths. This same controller can also be used to automate a lathe. You would just use the TurnMaster Pro software. The 3 Axis version would also be able to control a tool turret. A tower orientation is available on request.

SYSTEM

  • Choice of motors (Choose between 42HT1700, 34HT1275 , and 34HT750)
  • The 2 axis models are typically for lathes and come standard with (1) 34HT1275 and (1) 34HT750 motors
  • The 3 axis models are for Mills and come standard with (2) 42HT1700 and (1) 34HT1275 motors
  • All motors come with prewired armoured cables and locking circular connectors
  • G-code control & graphical software ( MillMaster Pro or TurnMaster Pro )
  • All cables & illustrated manuals
Product Order # Price Order
2 axis Rack Mount System- MN400 999-6200-102 $2,435
3 axis Rack Mount System - MN400 999-6200-103 $2,991
4 axis Rack Mount System - MN400 999-6200-104 $3,222
2 axis Rack Mount Microstepping System- MN400 999-6200-112 $2,643
3 axis Rack Mount Microstepping System- MN400 999-6200-113 $3,475
4 axis Rack Mount Microstepping System- MN400 999-6200-114 $3,695

Accessories Available

Product

Order #

Price

Order

6 inch CNC Rotary Table 900-0095-006 $945
3 Jaw Chuck Kit for 6 inch Rotary Table 900-0095-004

$370
4 Jaw Chuck Kit for 8 inch Rotary Table 900-0095-022 $534
Tailstock for 6 inch Rotary Table 900-0095-007 $185
8 inch CNC Rotary Table 900-0095-008 $995
3 Jaw Chuck Kit for 8 inch Rotary Table 900-0095-010 $472
4 Jaw Chuck Kit for 6 inch Rotary Table 900-0095-021 $453
Tailstock for 8 and 10 inch Rotary Tables 900-0095-009 $185
10 inch CNC Rotary Table 900-0095-013 $1,100
3 HP Variable Speed Spindle Controller, LeGrande 999-6500-039 $850
Additional Axis Option 1/2 Stepping (2 to 3) 999-1236-441 $550
Additional Axis Option Micro Stepping 999-1236-463 $650
Tapping System Tension/Compression 999-6500-080 $495
Easychange Tooling System With 6 Tool Holders

999-6500-090 $1,795
15 inch Multi Core Laptop Computer 999-5600-000 $750
Industrial Tool Cart & Operator Station 999-7000-000 $578
Suspension Arm for Laptop/PC 999-6500-003 $94
6 PC R8 Round Collet Set 999-6500-070 $44
20 PC Titanium End Mill Set 999-6500-060 $110
Digitizing Probe 980-0100-001 $500
R8 End Mill Holder Set 900-0210-000 $187
R8 to ER16 Collet Chuck 900-0200-101 $62
ER16 Collet Set (Inch) 900-0200-001 $119
ER16 Collet Set (Metric) 900-0200-002 $119
Edge Finder 870-1000-000 $17
MultiCAM Millturn CAM Software 999-5004-013 $495
Pump, Submersible, 170 Gph 999-6500-015 $92
6 inch CNC Machine Vise 999-6500-002 $252
Face Mill 900-0200-303 $100
58pc Clamping Set 999-6500-071 $59

Prices updated 11/14/2017